logo

Textile Dyeing & Finishing Mill in Bangladesh | Sodium Alginate for Cotton Reactive Printing

Published On: September 28, 2026

Case Content

Background This large textile dyeing & finishing mill in Bangladesh mainly carries out pre-treatment and reactive printing on cotton woven fabrics for garment export orders. The previous thickener caused bleeding patterns, stiff fabric hand feel, unstable viscosity between batches, low color yield for dark shades and residual gum after washing, which increased wastewater treatment cost. The client needed cost-effective textile-grade sodium alginate as printing thickener.

Solution We supplied textile-grade sodium alginate with matched viscosity grade according to their rotary screen printing machine and fabric weight. Our technical team guided the mixing & dissolving process to prepare stable printing base paste and optimized the formula together with their reactive dyes.

Results

  1. Good flow property of printing paste, sharp pattern without bleeding, fine lines well reproduced.
  2. Sodium alginate is anionic and repels reactive dyes, so no dye consumption and higher color yield with bright shade.
  3. Easy wash-off after fixation. Fabrics remain soft after soaping, no stiff hand feel.
  4. Stable viscosity batch by batch, controllable color difference during mass continuous production, fewer rejected pieces.
  5. Natural seaweed origin, biodegradable, lower wastewater load, complying with Bangladesh environmental standards.

Client Feedback Consistent quality and easy mixing. Printing defects were greatly reduced. It helps cut cost compared with imported thickeners. Now they place regular repeat orders.